63M Mop Service Basin

63M Mop Service Basin
Design Features:
  • 24″ x 24″
  • Mustee mop service basins are one-piece molded from high impact resistant structural fiberglass
  • Integral, molded-in drain for connection to 3″ ABS, PVC (Sch. 80) or cast iron
  • Available optimized drain seals for connection to 2″ pipe or 3″ soil pipe
  • Integral, molded-in drain for connection to 3″ ABS, PVC (Sch. 80) or cast iron
  • Colorfast white finish
  • Easy to install
Code Accepted
  • International Association of Plumbing and Mechanical Officials (IAPMO)® Listed
  • Warnock Hersey® (Canada) Listed-CSA test standards: Mop Basins – #B45.0
  • American National Standards Institute (ANSl)-Specification Z 124-2022
  • American Society of Testing and Materials (ASTM) E 84
  • CAN/ULC S102-07 Burn and Smoke Test
Specifications
Model Number Model H x W x D UPC
63M White 10″ X 24″ X 24″ 6 71031 00189 4

General: Furnish and install as shown on plans, Mop Service Basin model 63M, as manufactured by E.L. Mustee & Sons, Inc. Unit to be one-piece molded fiberglass made with matched metal molds using extreme heat and pressure. Height shall be 10″ with not less than 1″ wide shoulder. Size 24″ x 24”. Drain shall be integrally molded, complete with drain seal for installation of 3″ ABS, PVC (Sch. #80) and iron pipe. Removable stainless steel strainer. Performance tested to meet or exceed ANSI 124-2022 and FHA/HUD UM-73. Weight 45 lbs., cubic feet 4.2. Install in compliance with local codes.